End and Intermediate Tubes are part of the same assembly , forming on piece that is then connected to the metal ladle to tap molten from the pot in Reduction. Both are assembled together using 2 Clamps.

End and Intermediate Tubes are part of the same assembly, forming on piece that is then connected to the metal ladle to tap molten from the pot in Reduction. Both are assembled together using 2 Clamps.

The use of a scraper plate is a method for scraping the peel off the cane before the cane can be fed into the rollers.

Sheaves are useful for rerouting a cable or rope. Sheave and pulley are terms that are often used interchangeably. A pulley mechanism in which the rope is mounted to the object and the pulley is attached to a fixed point.

Mechanical component consisting of teeth attached to a rotating shaft. Gears are used to transmit motions smoothly with a particular speed ratio.

Pump Housing Cover The housing is the pump's mainframe, which supports the impeller and contains the pumped fluid. The impeller is a rotating set of blades that helps move the fluid through the pump. And finally, the motor provides the power needed to rotate the impeller and create suction.

Open Vane Impeller An open impeller has vanes that are attached to a center hub and mounted directly onto a shaft. Open impellers are usually used in npumps handling abrasive liquids or suspended solids (in which the impeller rotates between two side plates, between the casing walls of the volute, or between the stuffing box head and the suction head).

Volute Casing The volute casing is designed to guide the flow out of the impeller, in order to convert the fluid flow's kinetic energy into static pressure it serves to collect the fluid discharged from the impeller and route it to the discharge nozzle (also see Pump casing)

A fire hydrant is a water supply point for firefighting purposes. It is a connection to a water source, typically a municipal water supply, and is used by firefighters to access water quickly in the event of a fire.

Ladles are used when pouring steel alloys but can be used for pouring other metals. Metals is best poured from the base of the ladle to eliminate slag and other impurities.

A machine tool that rotates a work piece to perform various operations such as cutting , sanding, threading and turning.